do-lexer.cpp File Reference

#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <stdlib.h>
#include <ctype.h>
#include <assert.h>
#include "do-syntax.h"
#include <unistd.h>

Include dependency graph for do-lexer.cpp:

Go to the source code of this file.

Classes

struct  yy_buffer_state
struct  yy_trans_info

Defines

#define YY_INT_ALIGNED   short int
#define yy_create_buffer   do_create_buffer
#define yy_delete_buffer   do_delete_buffer
#define yy_flex_debug   do_flex_debug
#define yy_init_buffer   do_init_buffer
#define yy_flush_buffer   do_flush_buffer
#define yy_load_buffer_state   do_load_buffer_state
#define yy_switch_to_buffer   do_switch_to_buffer
#define yyin   doin
#define yyleng   doleng
#define yylex   dolex
#define yylineno   dolineno
#define yyout   doout
#define yyrestart   dorestart
#define yytext   dotext
#define yywrap   dowrap
#define yyalloc   doalloc
#define yyrealloc   dorealloc
#define yyfree   dofree
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION   2
#define YY_FLEX_MINOR_VERSION   5
#define YY_FLEX_SUBMINOR_VERSION   35
#define FLEX_BETA
#define INT8_MIN   (-128)
#define INT16_MIN   (-32767-1)
#define INT32_MIN   (-2147483647-1)
#define INT8_MAX   (127)
#define INT16_MAX   (32767)
#define INT32_MAX   (2147483647)
#define UINT8_MAX   (255U)
#define UINT16_MAX   (65535U)
#define UINT32_MAX   (4294967295U)
#define yyconst
#define YY_NULL   0
#define YY_SC_TO_UI(c)   ((unsigned int) (unsigned char) c)
#define BEGIN   (yy_start) = 1 + 2 *
#define YY_START   (((yy_start) - 1) / 2)
#define YYSTATE   YY_START
#define YY_STATE_EOF(state)   (YY_END_OF_BUFFER + state + 1)
#define YY_NEW_FILE   dorestart(doin )
#define YY_END_OF_BUFFER_CHAR   0
#define YY_BUF_SIZE   16384
#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
#define EOB_ACT_CONTINUE_SCAN   0
#define EOB_ACT_END_OF_FILE   1
#define EOB_ACT_LAST_MATCH   2
#define YY_LESS_LINENO(n)
#define yyless(n)
#define unput(c)   yyunput( c, (yytext_ptr) )
#define YY_BUFFER_NEW   0
#define YY_BUFFER_NORMAL   1
#define YY_BUFFER_EOF_PENDING   2
#define YY_CURRENT_BUFFER
#define YY_CURRENT_BUFFER_LVALUE   (yy_buffer_stack)[(yy_buffer_stack_top)]
#define YY_FLUSH_BUFFER   do_flush_buffer(YY_CURRENT_BUFFER )
#define yy_new_buffer   do_create_buffer
#define yy_set_interactive(is_interactive)
#define yy_set_bol(at_bol)
#define YY_AT_BOL()   (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
#define yytext_ptr   dotext
#define YY_DO_BEFORE_ACTION
#define YY_NUM_RULES   31
#define YY_END_OF_BUFFER   32
#define REJECT   reject_used_but_not_detected
#define yymore()   yymore_used_but_not_detected
#define YY_MORE_ADJ   0
#define YY_RESTORE_YY_MORE_OFFSET
#define YYSTYPE   char*
#define INITIAL   0
#define YY_EXTRA_TYPE   void *
#define YY_READ_BUF_SIZE   8192
#define ECHO   do { if (fwrite( dotext, doleng, 1, doout )) {} } while (0)
#define YY_INPUT(buf, result, max_size)
#define yyterminate()   return YY_NULL
#define YY_START_STACK_INCR   25
#define YY_FATAL_ERROR(msg)   yy_fatal_error( msg )
#define YY_DECL_IS_OURS   1
#define YY_DECL   int dolex (void)
#define YY_BREAK   break;
#define YY_RULE_SETUP   YY_USER_ACTION
#define YY_EXIT_FAILURE   2
#define yyless(n)
#define YYTABLES_NAME   "yytables"

Typedefs

typedef signed char flex_int8_t
typedef short int flex_int16_t
typedef int flex_int32_t
typedef unsigned char flex_uint8_t
typedef unsigned short int flex_uint16_t
typedef unsigned int flex_uint32_t
typedef struct yy_buffer_stateYY_BUFFER_STATE
typedef size_t yy_size_t
typedef unsigned char YY_CHAR
typedef int yy_state_type

Functions

void dorestart (FILE *input_file)
void do_switch_to_buffer (YY_BUFFER_STATE new_buffer)
YY_BUFFER_STATE do_create_buffer (FILE *file, int size)
void do_delete_buffer (YY_BUFFER_STATE b)
void do_flush_buffer (YY_BUFFER_STATE b)
void dopush_buffer_state (YY_BUFFER_STATE new_buffer)
void dopop_buffer_state (void)
YY_BUFFER_STATE do_scan_buffer (char *base, yy_size_t size)
YY_BUFFER_STATE do_scan_string (yyconst char *yy_str)
YY_BUFFER_STATE do_scan_bytes (yyconst char *bytes, int len)
void * doalloc (yy_size_t)
void * dorealloc (void *, yy_size_t)
void dofree (void *)
int dolex_destroy (void)
int doget_debug (void)
void doset_debug (int debug_flag)
YY_EXTRA_TYPE doget_extra (void)
void doset_extra (YY_EXTRA_TYPE user_defined)
FILE * doget_in (void)
void doset_in (FILE *in_str)
FILE * doget_out (void)
void doset_out (FILE *out_str)
int doget_leng (void)
char * doget_text (void)
int doget_lineno (void)
void doset_lineno (int line_number)
int dowrap (void)
int dolex (void)
void doerror (const char *text)

Variables

int doleng
FILE * doin = (FILE *) 0
FILE * doout = (FILE *) 0
int dolineno = 1
char * dotext
int do_flex_debug = 0


Define Documentation

#define BEGIN   (yy_start) = 1 + 2 *

Definition at line 145 of file do-lexer.cpp.

#define ECHO   do { if (fwrite( dotext, doleng, 1, doout )) {} } while (0)

Definition at line 669 of file do-lexer.cpp.

#define EOB_ACT_CONTINUE_SCAN   0

Definition at line 188 of file do-lexer.cpp.

#define EOB_ACT_END_OF_FILE   1

Definition at line 189 of file do-lexer.cpp.

#define EOB_ACT_LAST_MATCH   2

Definition at line 190 of file do-lexer.cpp.

#define FLEX_BETA

Definition at line 33 of file do-lexer.cpp.

#define FLEX_SCANNER

Definition at line 28 of file do-lexer.cpp.

#define INITIAL   0

Definition at line 577 of file do-lexer.cpp.

#define INT16_MAX   (32767)

Definition at line 91 of file do-lexer.cpp.

#define INT16_MIN   (-32767-1)

Definition at line 82 of file do-lexer.cpp.

#define INT32_MAX   (2147483647)

Definition at line 94 of file do-lexer.cpp.

#define INT32_MIN   (-2147483647-1)

Definition at line 85 of file do-lexer.cpp.

#define INT8_MAX   (127)

Definition at line 88 of file do-lexer.cpp.

#define INT8_MIN   (-128)

Definition at line 79 of file do-lexer.cpp.

#define REJECT   reject_used_but_not_detected

Definition at line 562 of file do-lexer.cpp.

#define UINT16_MAX   (65535U)

Definition at line 100 of file do-lexer.cpp.

#define UINT32_MAX   (4294967295U)

Definition at line 103 of file do-lexer.cpp.

#define UINT8_MAX   (255U)

Definition at line 97 of file do-lexer.cpp.

#define unput (  )     yyunput( c, (yytext_ptr) )

Definition at line 221 of file do-lexer.cpp.

 
#define YY_AT_BOL (  )     (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)

Definition at line 372 of file do-lexer.cpp.

#define YY_BREAK   break;

Definition at line 748 of file do-lexer.cpp.

#define YY_BUF_SIZE   16384

Definition at line 171 of file do-lexer.cpp.

#define YY_BUFFER_EOF_PENDING   2

Definition at line 288 of file do-lexer.cpp.

#define YY_BUFFER_NEW   0

Definition at line 276 of file do-lexer.cpp.

#define YY_BUFFER_NORMAL   1

Definition at line 277 of file do-lexer.cpp.

#define yy_create_buffer   do_create_buffer

Definition at line 9 of file do-lexer.cpp.

#define YY_CURRENT_BUFFER

Value:

( (yy_buffer_stack) \
                          ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
                          : NULL)

Definition at line 304 of file do-lexer.cpp.

#define YY_CURRENT_BUFFER_LVALUE   (yy_buffer_stack)[(yy_buffer_stack_top)]

Definition at line 311 of file do-lexer.cpp.

#define YY_DECL   int dolex (void)

Definition at line 736 of file do-lexer.cpp.

#define YY_DECL_IS_OURS   1

Definition at line 732 of file do-lexer.cpp.

#define yy_delete_buffer   do_delete_buffer

Definition at line 10 of file do-lexer.cpp.

#define YY_DO_BEFORE_ACTION

Value:

(yytext_ptr) = yy_bp; \
        doleng = (size_t) (yy_cp - yy_bp); \
        (yy_hold_char) = *yy_cp; \
        *yy_cp = '\0'; \
        (yy_c_buf_p) = yy_cp;

Definition at line 397 of file do-lexer.cpp.

#define YY_END_OF_BUFFER   32

Definition at line 405 of file do-lexer.cpp.

#define YY_END_OF_BUFFER_CHAR   0

Definition at line 160 of file do-lexer.cpp.

#define YY_EXIT_FAILURE   2

Definition at line 1827 of file do-lexer.cpp.

#define YY_EXTRA_TYPE   void *

Definition at line 588 of file do-lexer.cpp.

#define YY_FATAL_ERROR ( msg   )     yy_fatal_error( msg )

Definition at line 723 of file do-lexer.cpp.

Definition at line 11 of file do-lexer.cpp.

#define YY_FLEX_MAJOR_VERSION   2

Definition at line 29 of file do-lexer.cpp.

#define YY_FLEX_MINOR_VERSION   5

Definition at line 30 of file do-lexer.cpp.

#define YY_FLEX_SUBMINOR_VERSION   35

Definition at line 31 of file do-lexer.cpp.

#define YY_FLUSH_BUFFER   do_flush_buffer(YY_CURRENT_BUFFER )

Definition at line 340 of file do-lexer.cpp.

#define yy_flush_buffer   do_flush_buffer

Definition at line 13 of file do-lexer.cpp.

#define yy_init_buffer   do_init_buffer

Definition at line 12 of file do-lexer.cpp.

#define YY_INPUT ( buf,
result,
max_size   ) 

Value:

if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
                { \
                int c = '*'; \
                size_t n; \
                for ( n = 0; n < max_size && \
                             (c = getc( doin )) != EOF && c != '\n'; ++n ) \
                        buf[n] = (char) c; \
                if ( c == '\n' ) \
                        buf[n++] = (char) c; \
                if ( c == EOF && ferror( doin ) ) \
                        YY_FATAL_ERROR( "input in flex scanner failed" ); \
                result = n; \
                } \
        else \
                { \
                errno=0; \
                while ( (result = fread(buf, 1, max_size, doin))==0 && ferror(doin)) \
                        { \
                        if( errno != EINTR) \
                                { \
                                YY_FATAL_ERROR( "input in flex scanner failed" ); \
                                break; \
                                } \
                        errno=0; \
                        clearerr(doin); \
                        } \
                }\
\

Definition at line 676 of file do-lexer.cpp.

#define YY_INT_ALIGNED   short int

Definition at line 5 of file do-lexer.cpp.

#define YY_LESS_LINENO (  ) 

Value:

do { \
                int yyl;\
                for ( yyl = n; yyl < doleng; ++yyl )\
                    if ( dotext[yyl] == '\n' )\
                        --dolineno;\
            }while(0)

Definition at line 199 of file do-lexer.cpp.

#define yy_load_buffer_state   do_load_buffer_state

Definition at line 14 of file do-lexer.cpp.

#define YY_MORE_ADJ   0

Definition at line 564 of file do-lexer.cpp.

#define yy_new_buffer   do_create_buffer

Definition at line 350 of file do-lexer.cpp.

#define YY_NEW_FILE   dorestart(doin )

Definition at line 158 of file do-lexer.cpp.

#define YY_NULL   0

Definition at line 132 of file do-lexer.cpp.

#define YY_NUM_RULES   31

Definition at line 404 of file do-lexer.cpp.

#define YY_READ_BUF_SIZE   8192

Definition at line 660 of file do-lexer.cpp.

#define YY_RESTORE_YY_MORE_OFFSET

Definition at line 565 of file do-lexer.cpp.

#define YY_RULE_SETUP   YY_USER_ACTION

Definition at line 751 of file do-lexer.cpp.

#define YY_SC_TO_UI (  )     ((unsigned int) (unsigned char) c)

Definition at line 139 of file do-lexer.cpp.

#define yy_set_bol ( at_bol   ) 

Value:

{ \
        if ( ! YY_CURRENT_BUFFER ){\
        doensure_buffer_stack (); \
                YY_CURRENT_BUFFER_LVALUE =    \
            do_create_buffer(doin,YY_BUF_SIZE ); \
        } \
        YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
        }

Definition at line 362 of file do-lexer.cpp.

#define yy_set_interactive ( is_interactive   ) 

Value:

{ \
        if ( ! YY_CURRENT_BUFFER ){ \
        doensure_buffer_stack (); \
                YY_CURRENT_BUFFER_LVALUE =    \
            do_create_buffer(doin,YY_BUF_SIZE ); \
        } \
        YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
        }

Definition at line 352 of file do-lexer.cpp.

#define YY_START   (((yy_start) - 1) / 2)

Definition at line 151 of file do-lexer.cpp.

#define YY_START_STACK_INCR   25

Definition at line 718 of file do-lexer.cpp.

#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))

Definition at line 177 of file do-lexer.cpp.

#define YY_STATE_EOF ( state   )     (YY_END_OF_BUFFER + state + 1)

Definition at line 155 of file do-lexer.cpp.

#define yy_switch_to_buffer   do_switch_to_buffer

Definition at line 15 of file do-lexer.cpp.

#define yyalloc   doalloc

Definition at line 24 of file do-lexer.cpp.

#define yyconst

Definition at line 128 of file do-lexer.cpp.

#define yyfree   dofree

Definition at line 26 of file do-lexer.cpp.

FILE * yyin   doin

Definition at line 16 of file do-lexer.cpp.

int yyleng   doleng

Definition at line 17 of file do-lexer.cpp.

#define yyless (  ) 

Value:

do \
                { \
                /* Undo effects of setting up dotext. */ \
        int yyless_macro_arg = (n); \
        YY_LESS_LINENO(yyless_macro_arg);\
                dotext[doleng] = (yy_hold_char); \
                (yy_c_buf_p) = dotext + yyless_macro_arg; \
                (yy_hold_char) = *(yy_c_buf_p); \
                *(yy_c_buf_p) = '\0'; \
                doleng = yyless_macro_arg; \
                } \
        while ( 0 )

Definition at line 1839 of file do-lexer.cpp.

#define yyless (  ) 

Value:

do \
                { \
                /* Undo effects of setting up dotext. */ \
        int yyless_macro_arg = (n); \
        YY_LESS_LINENO(yyless_macro_arg);\
                *yy_cp = (yy_hold_char); \
                YY_RESTORE_YY_MORE_OFFSET \
                (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
                YY_DO_BEFORE_ACTION; /* set up dotext again */ \
                } \
        while ( 0 )

Definition at line 1839 of file do-lexer.cpp.

#define yylex   dolex

Definition at line 18 of file do-lexer.cpp.

int yylineno   dolineno

Definition at line 19 of file do-lexer.cpp.

 
#define yymore (  )     yymore_used_but_not_detected

Definition at line 563 of file do-lexer.cpp.

FILE * yyout   doout

Definition at line 20 of file do-lexer.cpp.

#define yyrealloc   dorealloc

Definition at line 25 of file do-lexer.cpp.

#define yyrestart   dorestart

Definition at line 21 of file do-lexer.cpp.

#define YYSTATE   YY_START

Definition at line 152 of file do-lexer.cpp.

#define YYSTYPE   char*

Definition at line 572 of file do-lexer.cpp.

#define YYTABLES_NAME   "yytables"

Definition at line 2032 of file do-lexer.cpp.

 
#define yyterminate (  )     return YY_NULL

Definition at line 713 of file do-lexer.cpp.

char * yytext   dotext

Definition at line 22 of file do-lexer.cpp.

#define yytext_ptr   dotext

Definition at line 387 of file do-lexer.cpp.

int yywrap   dowrap

Definition at line 23 of file do-lexer.cpp.


Typedef Documentation

typedef short int flex_int16_t

Definition at line 71 of file do-lexer.cpp.

typedef int flex_int32_t

Definition at line 72 of file do-lexer.cpp.

typedef signed char flex_int8_t

Definition at line 70 of file do-lexer.cpp.

typedef unsigned short int flex_uint16_t

Definition at line 74 of file do-lexer.cpp.

typedef unsigned int flex_uint32_t

Definition at line 75 of file do-lexer.cpp.

typedef unsigned char flex_uint8_t

Definition at line 73 of file do-lexer.cpp.

Definition at line 181 of file do-lexer.cpp.

typedef unsigned char YY_CHAR

Definition at line 376 of file do-lexer.cpp.

typedef size_t yy_size_t

Definition at line 225 of file do-lexer.cpp.

typedef int yy_state_type

Definition at line 380 of file do-lexer.cpp.


Function Documentation

YY_BUFFER_STATE do_create_buffer ( FILE *  file,
int  size 
)

void do_delete_buffer ( YY_BUFFER_STATE  b  ) 

Here is the caller graph for this function:

void do_flush_buffer ( YY_BUFFER_STATE  b  ) 

Discard all buffered characters. On the next scan, YY_INPUT will be called.

Parameters:
b the buffer state to be flushed, usually YY_CURRENT_BUFFER.

Definition at line 1619 of file do-lexer.cpp.

YY_BUFFER_STATE do_scan_buffer ( char *  base,
yy_size_t  size 
)

Setup the input buffer state to scan directly from a user-specified character buffer.

Parameters:
base the character buffer
size the size in bytes of the character buffer
Returns:
the newly allocated buffer state object.

Definition at line 1746 of file do-lexer.cpp.

Here is the call graph for this function:

Here is the caller graph for this function:

YY_BUFFER_STATE do_scan_bytes ( yyconst char *  yybytes,
int  _yybytes_len 
)

Setup the input buffer state to scan the given bytes. The next call to dolex() will scan from a copy of bytes.

Parameters:
yybytes the byte buffer to scan
_yybytes_len the number of bytes in the buffer pointed to by bytes.
Returns:
the newly allocated buffer state object.

Definition at line 1796 of file do-lexer.cpp.

Here is the call graph for this function:

Here is the caller graph for this function:

YY_BUFFER_STATE do_scan_string ( yyconst char *  yystr  ) 

Setup the input buffer state to scan a string. The next call to dolex() will scan from a copy of str.

Parameters:
yystr a NUL-terminated string to scan
Returns:
the newly allocated buffer state object.
Note:
If you want to scan bytes that may contain NUL values, then use do_scan_bytes() instead.

Definition at line 1783 of file do-lexer.cpp.

Here is the call graph for this function:

void do_switch_to_buffer ( YY_BUFFER_STATE  new_buffer  ) 

Here is the caller graph for this function:

void * doalloc ( yy_size_t  size  ) 

Definition at line 2010 of file do-lexer.cpp.

Here is the caller graph for this function:

void doerror ( const char *  text  ) 

Definition at line 2038 of file do-lexer.cpp.

void dofree ( void *  ptr  ) 

Definition at line 2027 of file do-lexer.cpp.

Here is the caller graph for this function:

int doget_debug ( void   ) 

Definition at line 1923 of file do-lexer.cpp.

YY_EXTRA_TYPE doget_extra ( void   ) 

FILE * doget_in ( void   ) 

Get the input stream.

Definition at line 1867 of file do-lexer.cpp.

int doget_leng ( void   ) 

Get the length of the current token.

Definition at line 1883 of file do-lexer.cpp.

int doget_lineno ( void   ) 

Get the current line number.

Definition at line 1858 of file do-lexer.cpp.

FILE * doget_out ( void   ) 

Get the output stream.

Definition at line 1875 of file do-lexer.cpp.

char * doget_text ( void   ) 

Get the current token.

Definition at line 1892 of file do-lexer.cpp.

int dolex ( void   ) 

int dolex_destroy ( void   ) 

Definition at line 1965 of file do-lexer.cpp.

Here is the call graph for this function:

void dopop_buffer_state ( void   ) 

Removes and deletes the top of the stack, if present. The next element becomes the new top.

Definition at line 1678 of file do-lexer.cpp.

Here is the call graph for this function:

Here is the caller graph for this function:

void dopush_buffer_state ( YY_BUFFER_STATE  new_buffer  ) 

Pushes the new state onto the stack. The new state becomes the current state. This function will allocate the stack if necessary.

Parameters:
new_buffer The new state.

Definition at line 1648 of file do-lexer.cpp.

void * dorealloc ( void *  ptr,
yy_size_t  size 
)

Definition at line 2015 of file do-lexer.cpp.

void dorestart ( FILE *  input_file  ) 

void doset_debug ( int  debug_flag  ) 

Definition at line 1928 of file do-lexer.cpp.

void doset_extra ( YY_EXTRA_TYPE  user_defined  ) 

void doset_in ( FILE *  in_str  ) 

Set the input stream. This does not discard the current input buffer.

Parameters:
in_str A readable stream.
See also:
do_switch_to_buffer

Definition at line 1913 of file do-lexer.cpp.

Here is the caller graph for this function:

void doset_lineno ( int  line_number  ) 

Set the current line number.

Parameters:
line_number 

Definition at line 1901 of file do-lexer.cpp.

void doset_out ( FILE *  out_str  ) 

Definition at line 1918 of file do-lexer.cpp.

int dowrap ( void   ) 

Definition at line 2069 of file do-lexer.cpp.


Variable Documentation

int do_flex_debug = 0

Definition at line 557 of file do-lexer.cpp.

FILE * doin = (FILE *) 0

Definition at line 378 of file do-lexer.cpp.

int doleng

Definition at line 316 of file do-lexer.cpp.

int dolineno = 1

Definition at line 384 of file do-lexer.cpp.

FILE * doout = (FILE *) 0

Definition at line 378 of file do-lexer.cpp.

char * dotext

Definition at line 566 of file do-lexer.cpp.


Generated on Sat Feb 20 19:04:26 2010 for Data Objects by  doxygen 1.5.9